Feed Balance On Stretch Stitch - Janome 415 Servicing Manual

FEED BALANCE ON STRETCH STITCH

TO CHECK:
IF THE STRETCH STITCH PATTERNS ARE DISTORTED WHEN SETTING THE STITCH
LENGTH CONTROL AT "S.S." (THERE IS A DIFFERENCE BETWEEN FORWARD FEEDING
AND BACKWARD FEEDING, ADJUST AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. REMOVE THE TOP COVER (SEE PAGE 4).
2. SET THE PATTERN SELECTOR DIAL AT (
AT "S.S."
3. TURN THE STRETCH STITCH ADJUSTING SCREW IN THE DIRECTION OF (C) WHEN
A > B, OR IN THE DIRECTION OF (D) WHEN A < B.
4. ATTACH THE TOP COVER.
A 1
A 1
A 2 3 B
A
2
A B A
MECHANICAL ADJUSTMENT
A
1
3 B
A
2
3 B
B A B
), AND THE STITCH LENGTH CONTROL
(C) (D)
18
STRECH STITCH
ADJUSTING SCREW