Setpoint Adjustment - LG MultiSITE CRC1 Series Installation Manual

CONTROLLER SETUP

Setpoint Adjustment

Setpoints can be modified in three different ways when in Auto Mode: Cooling
Setpoint change, Heating Setpoint change or Cooling/Heating Setpoint change.
09-26-2017
Occ Auto Cool
Cooling Setpoint °F
74°
Humidity
45 %
09-26-2017
Occ Auto Heat
Heating Setpoint °F
74°
Humidity
45 %
Due to our policy of continuous product innovation, some specifications may change without notification.
14
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Cooling mode or cooling only
2:43 PM
sequence of operation
In Cooling mode, the setpoint displayed
in the bar is the current occupied cooling
setpoint.
During occupied setpoint adjustment,
75.0
the large digits are temporarily used to
display the occupied cooling setpoint
while it is adjusted.
Normal temperature display resumes
after the setpoint is adjusted and the
actual occupied cooling setpoint is
displayed in the setpoint bar.
Heating mode or heating only
2:43 PM
sequence of operation
In Heating mode, the setpoint displayed
in the bar is the current occupied heat-
ing setpoint.
During occupied setpoint adjustment,
75.0
the large digits are temporarily used to
display the occupied heating setpoint.
Normal temperature display resumes
after the setpoint is adjusted and the
actual occupied heating setpoint is
displayed in the setpoint bar.