Chapter 6
Configure Compex SXP2224WM using Web Interface
6.7
Bandwidth Control
In a network environment, massive data are being
transferred from one node to another node/s. And this
often caused serious slowdown problems for interactive
network users. This means that users are forced to
restructure their operations due to network load
limitations.
To overcome this problem, Compex SXP2224WM is
specially designed to control the bandwidth using
relatively bandwidth technique. It enables you to specify
the maximum line bandwidth (in Mbps) that a particular
transfer operation can use, so that it can be carried out in
the background, at a low priority without interfering other
users or other network applications.
Rate:
•
Enter the bandwidth in
Mbps, where 0 indicates
"disable"
Ensure that the Flow Control status is "On" before
configuring the bandwidth control. Please refer to Section
6.2 "Port Configuration" for details in activating Flow
Control function.
32