Philips 32PFL3008D/78 Service Manual page 16

EN 16 5. TPS10.1L LA
Main Menu Sub-menu 1
Download from USB Copy Channel List from USB
Copy NVM from USB
Copy Readable Info from USB
Copy EDID from USB
Initialize NVM Press [OK] to Initialize NVM
immediately
Service Data Type Number
Production Number
12NC SSB
12NC PSU
12NC Display
Dealer Options Set Virgin mode
Store
Event Count Software Events
Hardware Events
Clear Software Events
Clear Hardware Events
How to Navigate
• In the SAM menu, select menu items with the UP/DOWN
keys on the remote control transmitter. The selected item
will be indicated. When not all menu items fit on the screen,
use the UP/DOWN keys to display the next/previous menu
items.
• With the "LEFT/RIGHT" keys, it is possible to:
– (De) activate the selected menu item.
– (De) activate the selected sub menu.
– Change the value of the selected menu item.
• When you press the MENU button once while in top level
SAM, the set will switch to the normal user menu (with the
SAM mode still active in the background).
• Press the following key sequence on the remote control
transmitter: "062596" directly followed by the "Home"
button to switch to SDM (do not allow the display to time out
between entries while keying the sequence).
How to Store SAM Settings
To store the settings changed in SAM mode (except the
RGB Align settings), leave the top level SAM menu by using
the POWER button on the remote control transmitter or the
television set. The mentioned exceptions must be stored
separately via the STORE button.
How to Exit SAM
Use one of the following methods:
• Switch the set to STANDBY by pressing the mains button
on the remote control transmitter or the television set.
• Via a standard RC-transmitter, key in "00" sequence.
Table 5-2 Factory mode overview
Item Item value
0 Main-MCU Ver
1 Bootloader Ver
2 Sub-MCU Ver
3 EEPROM Ver
4 Date
5 ModelName
6 Scaler
7 Panel Type
8 Source
9 Auto Color
2013-Apr-26
Service Modes, Error Codes, and Fault Finding
Sub-menu 2
Press [OK] use key pad edit type
number immediately
Press [OK] use key pad edit
production number immediately
Press [OK] use key pad edit SSB
immediately
Press [OK] use key pad edit PSU
immediately
Press [OK] use key pad edit display
immediately
Virgin mode:Off
Press [OK] to store virgin mode
immediately
0000 0000
0000 0000
Press [OK] to clear software events
immediately
Press [OK] to clear hardware events
immediately
Default value
32" 39" 42" Description
V1.00 V2.06 V1.03 Main-MCU Version
V0.01 Bootloader Version
NA SUB-MCU Version
NA EEPROM Version
Dec 24 Mar 18 Jan 22 Software release date
2012 2013 2013
32PFL3 39PFL 42PFL Model name
018D 3008D 3008D
MST6931XP Scaler model
TPT315 TPT39 TPT42 Display model
B5-A05 0J1-HV 0H2-H
1 N01 VN04
DTV ATV HDMI1 Input source
GO Only need to do automatic correction input source of effective,otherwise it is not action
Description
To download several settings from the USB stick to the TV
To initialize a (corrupted) NVM. Be careful, this will erase all settings.
Edit and display the applicable service data by using the displayed key pad.
Set Virgin mode
Store the virgin mode in the address
Software Events
Hardware Events
Clear Software Events
Clear Hardware Events
Note: When the TV is switched "off" by a power interrupt while
in SAM, the TV will show up in "normal operation mode" as
soon as the power is supplied again. The error buffer will not be
cleared.
5.2.4 Contents of the Factory mode:
Purpose
• To perform extended alignments.
Specifications
• Displaying and or changing Panel ID information.
• Displaying and or changing Tuner ID information.
• Error buffer clearing.
• Various software alignment settings.
• Testpattern displaying.
• Public Broadcasting Service password Reset.
• etc.
How to Activate the Factory mode
To activate the Factory mode, use the following method:
• Press the following key sequence on the remote control
transmitter: from the "Home screen" press "1999", directly
followed by the "Back" button. Do not allow the display to
time out between entries while keying the sequence.
After entering the Factory mode, the following items are
displayed,
back to
div. table