Assembly Instructions - Kärcher G 3500 OCT Operator's Manual

CAUTION
When connecting to water supply mains,
local regulations of your municipal water
company must be observed. In some ar-
eas connecting directly to public drinking
water supply may require a backfl ow pre-
vention device. This is to ensure that there
is no feedback of chemicals into the water
supply. Use a water fi lter to avoid potential
damage from dirt in the water supply.
■ Garden hose must be at least 5/8 inch
diameter.
■ Flow rate of water supply must not fall
below 4.0 GPM (gallons per minute)
Description
A Knob
B 5/16" X 1 3/4
Bolt
C 5/16" X 2" Bolt
D Hose Holder
E High Pressure
Hose
WATER SUPPLY (Cold Water Only)
■ Flow rate can be determined by running
■ The water supply temperature must not
■ Never use the pressure washer to draw
■ Always prevent debris from being drawn
■ Do not operate pressure washer without

ASSEMBLY INSTRUCTIONS

Hardware (included)
Purpose
Joint Assembly
Joint Assembly
Hose Holder Assembly
Hose Holder Assembly
Spray Gun Assembly
the water for one minute into an empty
5-gallon container.
exceed 122°F/50°C.
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
into the unit by using a clean water source.
Use additional water fi lter.
the water turned on.
Illustration Qty
2
2
1
1
1
English 5