Default Network Settings - Canon G4000 series Online Manual

Default Network Settings

LAN Connection Defaults
Item
Enable/Disable LAN
SSID
Wireless LAN security Disable
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enab./disab. Bonjour Enable
Service name
LPR setting
RAW protocol
LLMNR
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item
SSID (Identifier for wireless direct) DIRECT-abXX-G4000series *1
Password
Security method
WL Direct dev. name
Confirm request
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is
specified when the printer is turned on for the first time.)
Default
Disable LAN
BJNPSETUP
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
15 minutes
Canon G4000 series
Enable
Enable
Active
Default
YYYYYYYYYY *2
WPA2-PSK (AES)
ZZZZZZ-G4000series *3
Displayed
146