Refilling Ink Tanks - Canon G4000 series Online Manual

Refilling Ink Tanks

Check the remaining ink level with the ink tank indicator on the front of the printer. If the ink level is near the
lower limit line (A), refill the ink tank.
Note
• If the function for notifying the remaining ink level (remaining ink level notification function) is enabled,
resetting the remaining ink level count is required before refilling ink tank.
There are two ways to reset the remaining ink level count.
• Resetting the remaining ink level count when a remaining ink error occurs
• Resetting the remaining ink level count when a remaining ink error has not occurred
The error message appears on the LCD when a remaining ink error occurs.
If remaining ink level notification function is enabled
• If print results become faint or white streaks appear despite sufficient ink levels, see
Procedure.
• For precautionary notes on handling ink bottles, see
Refilling Procedure
When you need to refill an ink tank, follow the steps below.
Important
• Please ensure the printer remains flat after initial setup and is NOT turned upside down or on its side,
as ink in the printer may leak.
• If the remaining ink level notification function is enabled, refill the ink tank until full when refilling. If the
remaining ink level count is reset when the ink tank is not full, the printer cannot detect the ink level
correctly.
If remaining ink level notification function is enabled
1. Make sure the printer is on.
2. Open the scanning unit / cover (B).
Notes on ink bottles.
49
Maintenance