Canon G4000 series Online Manual page 125

• Adv. communication
◦ ECM TX
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ ECM RX
Selects whether to receive faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ TX start speed
Selects the fax transmission speed.
Ex:
The following settings are available.
33600 bps/14400 bps/9600 bps/4800 bps
The * (asterisk) on the LCD indicates the current setting.
The fax transmission start speed will be faster as the value is bigger.
Some of settings are not available depending on the country or region of purchase.
When the telephone line condition or connection is poor, selecting a lower transmission start
speed may solve transmission problems.
◦ RX start speed
Selects the fax reception speed.
Ex:
The following settings are available.
33600 bps/14400 bps/9600 bps/4800 bps
The * (asterisk) on the LCD indicates the current setting.
The fax reception start speed will be faster as the value is bigger.
Some of settings are not available depending on the country or region of purchase.
When the telephone line condition or connection is poor, selecting a lower reception start speed
may solve reception problems.
Auto print settings
• Received documents
Selects whether to print the received fax automatically when receiving a fax.
If you select Do not print, the received fax is stored in the printer's memory.
125