Health GEAR ITM 4500 User Manual page 12

Connect the product with power source by 12V adaptor and the indicator light
Press the "POWER" button to
start the massage function,
the power indicator light will
stop blinking, the massage
function will start in AUTO
nd
mode with 2 level intensity
Press "AUTO" button
and the massage
modes and intensities
will change
automatically.
In Auto or Manual modes
Press "INTENSITY"
button to change the
intensity of massage
function, there are 5 levels,
circulating a sequence of
2-3-4-5-1-2. The indicator
light of "INTENSITY" is
blinking faster when
intensity is higher.
For Safety DO NOT use more than 30 minutes per
If the unit is on and unattended it will auto shut
Controller Instruction
of "POWER" will blink into standby.
Note:
session.
off at 15 minutes.
Press "HEAT" button to
start the heat function.
The indicator light of
"HEAT" is red. Press
again to stop the heat
function, the indicator light
is out.
Press " MANUAL" button to
cancel the auto mode and
start the manual mode.
Press "MANUAL" button to
change the massage
modes. The indicator light
of "MANUAL" is red.
12