Troubleshooting - D-Link DIR-516 Quick Installation Manual

TROUBLESHOOTING

set-uP AnD ConFiGuRAtion PRoBleMs
1. HOW DO I RESET My DIR-516 TO FACTORy DEFAULT SETTINGS?
• ensure the dIR-516 is powered on.
• press and hold the reset button on the side of the device for 10 seconds.
Note: Resetting the dIR-516 to factory default will erase the current configuration settings.
2. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN My WIRELESS
NETWORK NAME (SSID) OR WIRELESS ENCRyPTION KEy?
• every pc that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless network name (ssId) and encryption key.
• use the web-based user interface (as described in question 1 above) to check or choose
your wireless settings.
• make sure you write down these settings so that you can enter them into each wirelessly
connected pc. You will find a dedicated area on the back of this document, this important
information for future use. You can reset the ssId to its default setting by following the reset
procedure detailed above.
3. WHy CAN I NOT GET AN INTERNET CONNECTION?
For adsl users please contact your Isp to make sure the service has been enabled/connected
by your Isp and that your Isp username and password is correct.
to download the latest firmware, please refer to the d-link website at www.dlink.com
DiR-516
5