Getting To Know Your Appliance /14; Prior To Startup /14 - Beko BKEX386+ Instructions For Use Manual

GB
4. The appliance should be positioned on a
smooth surface. The two front feet can be
adjusted as required.To ensure that your
appliance is standing upright adjust the two
front feet by turning clockwise or anti-
clockwise, until firm contact is secured with
the floor. Correct adjustment of feet prevents
excessive vibration and noise (Item 5).
5. Refer to "Cleaning and Care" section to
prepare your appliance for use.
Getting to know your appliance
(Item 1)
1 - Lamp housing
2 - Adjustable Cabinet shelves
3 - Wine bottles support
4 - Water collector
5 - Crisper cover
6 - Crispers
7 - Ice tray support & ice tray
8 - Compartment for quickly freezing
9 - Compartments for frozen froods keeping
10 - Adjustable foot
11 - Dairy Compartment
12 - Shelf for jars
13 - Shelf for bottles
Prior to startup
Before you begin operating your appliance,
the following points should be re-checked for
safety:
• Is the appliance standing properly on the
floor?
• Is there sufficient space for good air
circulation?
• Is the interior clean? (Also see the section
"Cleaning and care")
• Now connect the appliance to the mains.
The compressor is turned on; the interior light
comes on when the Fridge door is opened.
Do not place foodstuff into the refrigerator
until the temperature has reached the desired
level.
Setting the operating temperature
Control Panel
Control Functions
Considering Item 2, the following functions
are implemented on the appliance.
a) Fridge Set and Vacation
b) Freezer Set
c) Quick Fridge
d) Quick Freeze
e) Actual Fridge Temperature
f) Actual Freezer Temperature
g) Fridge Bar Graphs
h) Freezer Bar Graphs
i) Vacation Icon
j) Economy Icon
k) Quick Fridge Icon
l) Quick Freeze Icon
m) Alarm Icon
Description of the Control Functions
a) Fridge Set and Vacation
The desired fridge temperature of the
appliance can be adjusted by using fridge set
button. To change the fridge set temperature
press the fridge set button. The first time the
button is pressed the current set temperature
is shown on the display then afterwards, each
time the button is pressed the new fridge set
temperature will be displayed in sequence: 4,
2, 8, 6, 4, ...
The fridge set temperature will blink on the
display for 5 seconds only. Then the actual
fridge temperature will be shown.
Vacation: The fridge compartment
temperature can be adjusted around 13° C.
When the fridge compartment is empty,
vacation function can be activated if desired.
The use of this function will save some power.
In order to preserve temperature inside the
fridge compartment, the fridge door should be
kept closed during vacation function.
Otherwise, the door open alarm will be active
within a minute and the interior light of the
fridge compartment will light on.
14
Instruction for use