Setup In Av In Mode - Xoro HTL2722W Operation Manual

INSTALLATION / INITIAL SETUP

Setup In AV IN mode

Using the Setup menu
1. Press MENU and then use V+ or V- to
select the SET UP.
2. Press ENTER to access the sub-
menu.
3. Use the P+ or P- to choose the Lan-
guage, Auto tuning, Manual tuning,
Program Label, Program items.
4. Make the selections and settings as
described in the following Chapter.
5.
You can exit the menu by pressing
the EXIT button.
Basic Operation
1) Language
Press V+ or V- to access the SETUP and
enter again the Language.
The selection of control is English only in Euro
mode.
2) Colour system
Press V+ or ENTER to access the SETUP
and enter again the Colour system.
This item is to change the colour system of
the current AV source.
The selection of control is AUTO, NTSC, PAL,
SECAM, PAL60, NTSC443,
PALCN.
Language
Color System
Language
Color system
PALM and
English
Auto
English
Auto
37