Using The Av 1 Input Jacks - Philips 100Hz TV Directions For Use Manual

T he TV's audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV 1 Input Jacks located on the
back of the TV.
1
Connect the VIDEO (yellow) cable to
the VIDEO AV1 IN jack on the back of
the TV.
2
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV1 IN jacks on the rear of the TV.
3
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
4
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5
Turn the VCR (accessory device) and
the TV ON.
6
Press the SOURCE SELECT button
on the remote control to display the
SOURCE menu.
7
Press the CURSOR UP or DOWN
button to select the AV1 option.
8
Press the OK button to confirm your
selection. The TV will change to the
AV1 channel.
U AV 1 I
SING THE
AV1
Source
6
8
7
ACITVE
SOUND CONTROL
J
NPUT ACKS
TV
AV1: VCR
AV2: Recorder
AV3: DVD
AV4: HD
SIDE: Camera
BACK OF VCR
7
ANT/CABLE
OUT
5
(EQUIPPED WITH VIDEO AND
PICTURE
ZOOM
7
BACK OF TV
2
AUDIO IN
(RED/WHITE)
R L
S-VIDEO VIDEO
AUDIO OUT
OUT OUT
4
7
VCR
AUDIO OUTPUT JACKS)
1
VIDEO IN
(YELLOW)
3