Using The Av 4 Input Jacks - Philips 100Hz TV Directions For Use Manual

T he AV4 Input Jacks provide Component Video
Inputs at 1080i, for accessories like a HD
Receiver and Digital DVD Players. Using the
color difference signals (Pb, Pr) and the lumi-
nance (Y) signal will improve color bandwidth
information.
1
Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player
(or similar device) to the (Y, Pb, Pr) AV4
IN(put) jacks on the TV.
2
Connect the red and white AUDIO
CABLES to the AUDIO (left and right)
OUT(put) jacks on the rear of the accesso-
ry device to the Audio (L and R) AV4
IN(put) jacks on the TV.
3
Press the SOURCE SELECT button
on the remote control to display the
SOURCE menu.
4
Press the CURSOR UP or DOWN
button to select the AV3 option.
5
Press the OK button to confirm your
selection. The TV will change to the
AV3 channel.
6
Turn the TV and the DVD (or digital
accessory device) ON.
7
Press the PLAY button on the DVD (or
digital accessory device) to view the pro-
gram on the television.
U AV 4 I
SING THE
Note: If the AV4 channel is tuned and no signal con-
nection present, the screen could jump or flash.
1
AV4
TV
AV1: VCR
AV2: Recorder
AV3: DVD
Source AV4: HD
SIDE: Camera
3
5
4
ACITVE
SOUND CONTROL PICTURE
ZOOM
11
J
NPUT ACKS
COMPONENT
VIDEO
CABLES
6
OF DIGITAL DEVICE SUCH
AS A DVD PLAYER
COMPONENT VIDEO
4
JACK PANEL
ON BACK OF TV
2
AUDIO IN
(RED/WHITE)
7
JACK PANEL
EQUIPPED WITH
OUTPUTS