Search Method - Philips 100Hz TV Directions For Use Manual

Color tv
Hide thumbs Also See for 100Hz TV:
Table of Contents

Advertisement

S
ETTING THE
T
he Auto Search Method of programming the
remote control can take several minutes to
complete. So before starting, it is recommended
that you seat yourself in a comfortable position
at least six feet from the accessory device. You
will have to hold the remote so that it is pointed
at the front of the device for the entire time the
search is taking place.
1
Turn the accessory device ON using the
devices power button.
2
Press the desired MODE button that
corresponds to the type of device you
wish to operate. (CBL, VCR, AMP, HD,
SAT, DVD, or CD) A green light will
indicate the mode labeled on the top of
the button, while a red light will indicate
the mode labeled on the bottom of the
button. If needed, hold the button down
and the light will toggle between the
green and red settings.
3
Press and hold the NUMBER 1 and 3
buttons at the same time until the back-
light and selected mode buttons light up.
Then, release both buttons.
4
Press and release the red POWER but-
ton on the remote control. The backlight
buttons will turn off.
The remote will start the Auto Search of all
available codes, sending a command to channel
up. The backlight will blink after each code is
tried. (For devices such as DVD or CD players,
insert a disc and press PLAY on the device. The
remote control will send a command to switch to
the next track. Switch AV receivers to the tuner
function.)
IMPORTANT: Watch the channel indicator of
your accessory device closely. Once the right
code is found the channels on your device will
start to scan up.
5
Press and release the red POWER but-
ton on the remote control as soon as the
channels start to change. The backlight
buttons and selected mode button will
blink twice to indicate the Auto Search
code setup is complete.
Note: if any other buttons are pressed during the
procedure, the Auto Search will end.
Remember, Auto Search can take several min-
utes to complete. Please be patient.
R
C
EMOTE
ONTROL TO
O
A
PERATE
CCESSORY
Satellite Receiver
Cable Converter
1
VCR
2
3
CONTROL
SOUND
D
EVICES
07
08
09
06
07
06
07
08
09
4
5
3
ACITVE
PICTURE
ZOOM
55
09
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

34pw98189934pw981830pw9818Color tv

Table of Contents