Using The Tv's Audio/Video Input Jacks - Philips MX2791 User Manual

H
A /V I
UDIO IDEO NPUTS
The TV's Audio/Video Input jacks
are for direct picture and sound
connections between the TV and
a VCR (or similar device) that
has Audio/Video Output jacks.
BEGIN
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con-
nect the AUDIO (red and white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV.
Connect the VIDEO (yellow)
CABLE to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
Turn the VCR and the TV
ON.
Use the A/V button on the
remote to select the AV 1 chan-
nel.
With the VCR ON and a prere-
corded tape inserted, press the
PLAY button to view the tape
on the television.
S H
MART ELP
Remember, after it is con-
nected an easy way to select
the VCR mode is to press the
TV/VCR button on the remote.
Channel 3 and 4 can also be
selected this way.
U
OW TO SE THE
NOTE: Repeatedly pressing the AV
button on the remote will toggle the
picture source from the current chan-
nel, to the AV 1 connection, to the
AV 2 connection, to the SVID-R
connection.
This also applies to the Multi Media
button on the remote. Repeatedly
pressing the Multi Media button will
toggle the picture source from the
current channel to the MM 1 (AV 1)
connection, to the MM 2 (AV 2) con-
nection, to the MM 3 (SVID-R) con-
nection.
24
AV 1
AV 2
SVID-R
4
LOCATOR
AV
TV
VCR SWAP
ACC
SMART
SOUND
MENU
VOL
CC
SLEEP
VCR
RECORD
A /V
UDIO IDEO
PIP ANT "B"
ANT "A"
75
BACK OF VCR
POWER
ON/OFF POSITION FREEZE
3
SOURCE PIP CH
DN
UP
SMART
PICTURE
SURF
CH
MUTE
STATUS CLOCK A/CH
EXIT TV/VCR
TUNER
A/B
MULTI
MEDIA
INCREDIBLE
STEREO
I J
NPUT ACKS
BACK OF TV
8 8 1
+ R – – L +
SURROUND SOUND
S-VIDEO
75
VIDEO
L
AUDIO
R/MONO
IN-2 IN-1 OUT
AUDIO IN
(RED/WHITE)
ANTENNA
OUT OUT
IN
R AUDIO L VIDEO ANTENNA
OUT
IN IN
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO
R/MONO JACK. IF A
DUMMY JACK IS
PLUGGED INTO THE
AUDIO L, NO SOUND
WILL BE HEARD.
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
VIDEO IN
(YELLOW)
2