Cisco AS5400XM Installing Manual page 8

Connecting to the Network
Figure 3-8
T1/E1 8 PRI
connector
Use a serial transition cable to connect one of the two synchronous serial ports to a modem or a
•
CSU/DSU. (See
Figure 3-9
Synchronous serial
Serial
transition
cable
Note
Cisco AS5400XM Universal Gateway Chassis Installation Guide
3-8
Connecting to an RJ-45 Jack
E1 cable
Figure 3-9.)
Connecting to a CSU/DSU
port (DB-26)
EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,
EIA/TIA-530, V.35, or X.21 connector
For cable and port pinouts for specific dial feature cards, see
Specifications," in the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card
Installation Guide.
Chapter 3 Installing the Cisco AS5400XM Universal Gateway
CSU/DSU or
other DCE or DTE
Appendix C, "Cabling
RJ-45 jack
Internet
OL-6418-02