Table of Contents
Advertisement
Tips for Scanning
1.
Place the document to be scanned on a flat surface.
2.
Hold the pen just like holding a common pen. When
the scanning trigger pin is pressed (lightly) towards
the paper the scanning light will turn on. Without
rushing it, start moving the pen along the text line as
soon as the scan light is lit up. The scanning process
will go on until the trigger pin is released.
3.
Ensure the angle between the tip and the surface is
in the range of 70-90°, to enable the scanning light to
turn on and to get high-quality images.
4.
To ensure a complete recognition, place the tip of the
scan pen at the location about half a word in front of
the first word of the text when starting scanning, and
lift up the pen at the location about half a word after
the last word when finishing scanning.
5.
During the scanning process, you may scan the text
from right to left or from left to right.
6.
The scan pen can only recognise one text line at a
14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ReaderPen and is the answer not in the manual?
Questions and answers
does this reader offer voice options to select for the reading of translations?
The C-Pen ReaderPen includes mono- and bilingual dictionaries, which suggests it can provide translations. It also supports text-to-speech (TTS) in multiple languages, including English, French, and Spanish. However, the context does not explicitly state whether it reads translations out loud.
This answer is automatically generated
The scanning light does not illuminate when I am trying to scan a sentence. This is a new pen and it was working before. The pen is fully charged and I tried resetting it.