Connecting Via Wps (Pin Mode) - Canon EOS REBEL T6 (W) Wireless Function Instruction Manual

Connecting via WPS (PIN Mode)

This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding

area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.

96
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function] (p.17).
If a screen for setting a nickname (for

identification) appears, register a
nickname (p.14).
Select [m].
2
Select [m] (Upload to Web service)

and press <0>.
Select a Web service.
3
Select a Web service to connect to,

then press <0>.
The contents and ordering of the list

of items displayed will vary depending
on settings (p.91).
The Web service to connect to can be

changed when reconnecting (p.108).

The camera's <k> lamp will blink.
Depending on the selected Web

service, the [Send to] screen is
displayed. Select a destination
(p.103).