Operation Flowchart - Canon EOS REBEL T6 (W) Wireless Function Instruction Manual

Operation Flowchart

This section explains the basic operation of the wireless functions and
how to register a nickname (for identification).
Follow the procedures below.
Set [Wi-Fi/NFC] to [Enable].
(Steps 1 and 2 on page 17)
When this setting is selected for the first time, a
screen to register a nickname is displayed.
Register a nickname. (p.14)
Set the camera's nickname.
Be sure to set a nickname as otherwise you
cannot go to the wireless function settings
screen.
Display the [Wi-Fi function] screen.
(Steps 3 and 4 on page 17-18)
Select a Wi-Fi function and establish a
connection.
For further settings, see "Easy Connection" or
"Advanced Connection".
Easy Connection (p.23)
Connect the camera directly to the
device.
12
Advanced Connection (p.71)
Connect using a Wi-Fi access point.