Connecting Automatically With The Nfc Function - Canon EOS REBEL T6 (W) Wireless Function Instruction Manual

Connecting Automatically with the NFC Function

Connect the camera and a smartphone using the NFC function.
The operation flow for connecting via NFC is as follows.
(1) Turn on the camera and smartphone.
(2) Enable the NFC function on the camera and smartphone.
(3) Touch the smartphone to the camera so that they come into
contact with each other.
For the camera's NFC setting, see page 20.

For the smartphone's Wi-Fi setting, NFC setting, and NFC antenna

position, refer to the smartphone's instruction manual.
Enable the NFC function on the
1
camera and smartphone
Touch a smartphone to the
2
camera.
If the download site of Camera

Connect appears on the smartphone,
install Camera Connect (p.22).
If an image is being played back on

the camera, press the <x> button to
end the playback.
Touch the p mark on the smartphone

to that on the camera so that they
come into contact with each other.
When a message indicating the

connection is displayed on the
camera's LCD monitor, move the
smartphone away from the camera.
 The camera's <k> lamp will blink.
 Camera Connect starts on the
smartphone and establishes a
connection.
.
(p.20)
27