Reconnecting - Canon EOS REBEL T6 (W) Wireless Function Instruction Manual

Reconnecting

The camera can reconnect to a printer for which connection settings
have been registered.
If you do not know the SSID of the camera when reconnecting, select

[Review/change settings] in step 3 to check it (p.113).
When connected by selecting [Easy connection] in camera access

point mode, "_Canon0A" is appended to the SSID of the camera.
64
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [l].
2
Select [l] (Print from Wi-Fi printer)

and press <0>.
Select [Connect].
3
When settings for multiple connection

destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Select [Connect] and press <0>.

On the confirmation dialog, select [OK].


The camera can reconnect to a printer.
If the printer's connection destination

has been changed, restore the setting
to connect to the camera before
performing this operation.