Philips VOX300 User Manual page 42

EN
PROBLEMS
The handset displays „not
available" :
• when attempting to add
another handset to the
base station,
• when using a handset.
Noise interference on your
radio or television
Caller Line Identification
(CLI) service does not
work.
A phonebook entry cannot
be stored.
Answer machine troubleshooting
PROBLEMS
The answer machine does
not record messages.
The remote control access
does not work.
It is not possible to record
an outgoing message.
The CD 135 hangs up
during remote access.
The answer machine stops
automatically.
42
Troubleshooting
CAUSES
• The procedure to add a
handset has failed, try
again.
• Maximum number of
handsets (5) has been
reached.
• Base station is already
busy with another
handset.
• The CD 135 base station
or mains power pack are
too close to electrical
appliances.
• The service is not
activated.
• The phonebook is full.
CAUSES
• The memory is full.
• The answer only mode is
activated.
• The remote control
access is not activated.
• The memory is full.
• Duration is too long.
• The memory is full.
SOLUTIONS
• Disconnect and connect
the base station power
supply.
• Remove and place back
the handset batteries.
• Follow the procedure to
register a handset
(page 31).
• Unregister a handset.
• Wait until it is available.
• Move the power pack or
base station as far away as
possible.
• Check your subscription
with your network
operator.
• Delete an entry to free
memory.
SOLUTIONS
• Delete messages.
• Select the Answer&record
mode (see page 36).
• Activate the remote
control (see page 37).
• Delete old messages (see
page 36).
• Manage the remote
control quicker.
• Play and delete messages.