Advertisement
CONTROLS
CONTROLS
①
POWER indicator
The green lamp lights while the unit is turned on.
②
INPUT SENS. (input sensitivity) controller
Set this control according to the line-output level of the center
unit connected with this unit. For the line-output level, refer to the
"SPECIFICATIONS" in the instruction manual of the center unit. This
controller is preset to 5 V when the unit is shipped.
③
CROSSOVER filter switch
OFF:
Normally set to this position.
HPF:
Set to this position when you want to turn on the HPF (High-Pass
Filter) switch.
④
CROSSOVER frequency controller
Turning this adjusts the cutoff frequency within the range of 50 Hz to
200 Hz. Adjust the level while listening to the sound. This control is
preset to 50 Hz when the unit is shipped.
⑤
LPF (Low-Pass Filter) controller
Adjust the cutoff frequency (the Low-Pass Filter transmits
frequencies lower than the cutoff frequency) within the range of
50 Hz to 200 Hz. Adjust the level while listening to the sound. This
controller is preset to 50 Hz when the unit is shipped.
⑥
BASS BOOST controller
Turning this boosts the 45 Hz frequency within the range of 0 dB to
+18 dB. Adjust the level while listening to the sound. This controller
is preset to MIN when the unit is shipped.
⑦
INPUT MODE switch
4ch:
To input signals only to the front speakers or only to the front and
rear speakers, set this switch to "4ch".
5ch:
To input signals to all speakers (front speakers, rear speakers, and
subwoofer), set this switch to "5ch". This switch is preset to the
position when the unit is shipped.
English
Advertisement
