Advertisement
SPEAKER CONNECTIONS
SPEAKER CONNECTIONS
The proper lead connected to each SPEAKER OUTPUT terminal is AWG
18 to AWG 12. (The cross section is about 0.8 mm
A 5-speaker system—Normal Mode (1)
• Use the speakers with an impedance of 2 Ω to 8 Ω.
❶ Right Front
❸ Right Rear
❺ Subwoofer
① JVC car receiver, etc.
② Line out (Front)
③ Line out (Rear)
④ Subwoofer
B 5-speaker system—Normal Mode (2)
• Use the speakers with an impedance of 2 Ω to 8 Ω.
❶ Right Front
❸ Right Rear
❺ Subwoofer
⑤ JVC car receiver, etc.
⑥ Line out (Front)
⑦ Line out (Rear)
C 5-speaker system—Normal Mode (3)
• Use the speakers with an impedance of 2 Ω to 8 Ω.
❶ Right Front
❸ Right Rear
❺ Subwoofer
⑧ JVC car receiver, etc.
⑨ Subwoofer
a White "FRONT LEFT (+)"
b Gray "FRONT RIGHT (+)"
c Green "REAR LEFT (+)"
d Purple "REAR RIGHT (+)"
e White (Stripe) "FRONT LEFT (–)"
f Gray (Stripe) "FRONT RIGHT (–)"
g Green (Stripe) "REAR LEFT (–)"
h Purple (Stripe) "REAR RIGHT (–)"
• The power is turned on and off as the unit detects input signal
("Auto Turn-On"). Therefore it is not necessary to connect the REM
wire. (❷-a, ❷-b)
D 3-speaker system—Bridge Mode
• Use the speakers with an impedance of 4 Ω to 8 Ω.
• Use the subwoofer with an impedance of 2 Ω to 8 Ω.
❻ Right Front
❽ Subwoofer
⑩ JVC car receiver, etc.
⑪ Line out (Front)
⑫ Line out (Rear)
⑬ Subwoofer
*1 Not supplied
*2 If your receiver is not equipped with line output (Subwoofer), set
the input mode switch to "4ch".
English
to 3.3 mm
2
❷ Left Front
❹ Left Rear
❷ Left Front
❹ Left Rear
❷ Left Front
❹ Left Rear
❼ Left Front
.)
2
2
Advertisement
