Draining Solution Tank - Tennant t500 Operator's Manual

OPERATION
4. Remove the debris tray and empty (Figure 88).
5. Rinse out the recovery tank with clean water and
wipe clean of any soil residue (Figure 89).
If machine is equipped with spray nozzle option, use
spray nozzle to rinse out recovery tank (Figure 90).
The water supply is provided from the machine's
solution tank. If cleaning detergent was added to
solution tank, do not use spray nozzle for rinsing
proposes.
FOR SAFETY: When servicing machine, do not
power spray or hose off machine. Electrical
malfunction may occur. Use damp cloth.
32
FIG. 88
FIG. 89
FIG. 90

DRAINING SOLUTION TANK

Drain the solution tank daily.
1. Transport the machine to drain area.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
2. To drain remaining water from solution tank, pull
the solution tank level hose from the accessory rail
(Figure 91). Firmly reconnect the hose to the
accessory rail after draining tank.
3. Rinse solution tank with clean water (Figure 92).
4. Remove the solution tank filter and clean screen
after every 50 hours of use (Figure 93). Solution
filter is located under machine at rear. Drain
solution tank before removing filter.
FIG. 91
FIG. 92
FIG. 93
Tennant T500 (01-2017)