Start Sewing - Singer 7640 Instruction Manual

Your machine may include an Even Feed Foot.
Use this foot for sewing plaids, stripes and other napped fabrics such as velvet
and corduroy. The Even Feed Foot equalizes the feeding of the fabric layers.
1. Attach the Even Feed Foot to the shank of the machine. Make sure that the
extension arm sits on top of the needle clamp screw when attaching the foot
to the shank.
2. Set the machine to Straight Stitch number 01 and begin to sew.
Your machine may include an Open Toe Foot.
It can be used for decorative embellishment. Because the front of the foot is
open, it allows a better view of the sewing area.
1. Attach the Open Toe Foot.
2. Set the machine to the desired decorative stitch and begin to sew.
Your machine may include a Cording Foot.
This foot is designed to apply ne cords as decorative embellishment. Use a
Zig Zag stitch (Utility Stitch number 06) or a Multistitch Zig Zag stitch (Utility
Stitch number 07) to apply the cord.
1. Attach the Cording Foot.
2. Slip one to 3 cords from right to left into the grooves at the top of the foot.
Knot the ends of the cords and slip under the foot and to the back about 2
inches (5 cm).
3. Select the stitch, adjust the width if necessary and begin to sew.
Your machine includes a Zipper Foot.
It is used with a Straight Stitch to apply centered and lapped zippers.
1. Attach the Zipper Foot.
2. Attach the left side of the Zipper Foot when sewing the right side of the
zipper.
3. Attach the right side of the Zipper Foot when sewing the left side of the
zipper.
Go to www.singerco.com for more information on zipper applications.

START SEWING

Even Feed Foot
Open Toe Foot
Cording Foot
Zipper Foot
3
31