Do you have a question about the 7146; 7186 and is the answer not in the manual?
Questions and answers
Antonella
January 16, 2025
Non si riesce a far passare il filo dellabobina nella scanalatura
1 comments:
Mr. Anderson
February 3, 2025
To thread the bobbin thread through the groove on a Singer model 7146 or 7186, follow these steps:
1. Turn Off the Machine: Ensure the machine is turned off for safety.
2. Open the Bobbin Case Area: Slide the extension table or open the bobbin access plate to expose the bobbin case.
3. Insert the Bobbin: Place the wound bobbin into the bobbin case with the thread unwinding in the correct direction (usually counterclockwise).
4. Pull the Thread into the Groove: Locate the groove or slot on the bobbin case. Pull the thread into this groove, ensuring it slides securely into place.
5. Guide the Thread Under the Tension Spring: Pull the thread further so that it slips under the tension spring on the bobbin case. This ensures proper tension during sewing.
6. Leave a Tail: Pull out about 4-6 inches of thread and let it hang loose outside the bobbin case.
7. Close the Bobbin Case Area: Replace the access plate or extension table.
8. Bring Up the Bobbin Thread: Hold the top thread with your hand and turn the handwheel toward you to lower and lift the needle. This action will pick up the bobbin thread. Pull both threads to the back of the presser foot.
Your bobbin thread is now properly threaded through the groove and ready for sewing.
Need help?
Do you have a question about the 7146; 7186 and is the answer not in the manual?
Questions and answers
Non si riesce a far passare il filo dellabobina nella scanalatura
To thread the bobbin thread through the groove on a Singer model 7146 or 7186, follow these steps:
1. Turn Off the Machine: Ensure the machine is turned off for safety.
2. Open the Bobbin Case Area: Slide the extension table or open the bobbin access plate to expose the bobbin case.
3. Insert the Bobbin: Place the wound bobbin into the bobbin case with the thread unwinding in the correct direction (usually counterclockwise).
4. Pull the Thread into the Groove: Locate the groove or slot on the bobbin case. Pull the thread into this groove, ensuring it slides securely into place.
5. Guide the Thread Under the Tension Spring: Pull the thread further so that it slips under the tension spring on the bobbin case. This ensures proper tension during sewing.
6. Leave a Tail: Pull out about 4-6 inches of thread and let it hang loose outside the bobbin case.
7. Close the Bobbin Case Area: Replace the access plate or extension table.
8. Bring Up the Bobbin Thread: Hold the top thread with your hand and turn the handwheel toward you to lower and lift the needle. This action will pick up the bobbin thread. Pull both threads to the back of the presser foot.
Your bobbin thread is now properly threaded through the groove and ready for sewing.
This answer is automatically generated