boso Medilife S User Instructions page 56

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 36
Measurement display
56
Invalid measurements with an 'Err'
message (see page 61) are not stored.
If the symbol '
measurement, it is recommended that
the measurement is repeated, holding
the arm completely still.
If the '
even with the arm held still, this may be
an indication of an irregular heartbeat.
Please discuss this with your doctor at
your next visit.
Blood pressure is a dynamic parameter
and can be affected by the patient's po-
sition, e.g. sitting, standing, lying, mo-
ving, before or during the measurement
as well as by his physical condition
(stress, disease, etc.).
' appears after the
' symbol appears again
If the measurement result is obvio-
usly wrong, repeat the measure-
ment.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the 'START' button again
briefly.
Allow at least two minutes
2
between measurements.
min
If no further measurement is requi-
red, remove the unit from the wrist.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Medilife s

Table of Contents