Viewing Your Meter's Memory - Medline evencare g2 User Manual

Viewing Your Meter's Memory

Your EvenCare G2 Meter automatically stores up to 300 test and control
results with date and time. The meter also provides 7, 14, and 30 day
averaging to help track your blood glucose trend. You must set up the date
and time on your meter properly to use the memory and day averaging
function, see Setting the Clock on page 15. The meter will not record test or
control results if the date and time are not set.
Viewing Stored Readings and 7, 14, 30 Day Averages in Meter
Memory
You will need:
√ Your EvenCare G2 Meter
Step 1:
Press and hold Enter (
Step 2:
Press Enter (
Step 3:
Press ▲or▼ until MEM starts to flash. If the voice function is on, the
meter will say "memory recall." Press Enter (
MEM will appear at the upper left corner of the
display screen together with your most recent
testing result. Press ▲ to see the next result,
and the next, and so on. Holding ▲ will flash
through the results.
Viewing Your Meter's Memory
) to turn on the meter.
) to enter setup screen.
EvenCareG2
PM
mem
DAY
AVG
ctl
code code
mem
) to enter.
mem
mem
mg/dL
mo /dL
ctl
PM
PM
mem
PM
41