Do you have a question about the EVENCARE ProView and is the answer not in the manual?
Questions and answers
Missy Smiley
June 6, 2025
We use the Evencare G3 Glucometer at our organization. We have been using the purple-top sani-wipes to clean the meter. However, when I look at the EPA numbers it is not the same as what you have in your MIFU. Are these wipes approved for cleaning of those meters?
Certified Instructor Record Certified Instructor Record Competency Checklist Review of Nurse’s Technique EVENCARE ProView Quality Control Log Blood Glucose System Performing a Control Solution Test EVENCARE ProView Blood Glucose Test Strip Package Insert EVENCARE ProView Glucose Control Solution Package Insert...
OPERATOR'S MANUAL Thank you for choosing the EVENCARE ProView Professional Blood Glucose Monitoring System to help monitor your patients’ blood glucose levels. The EVENCARE ProView Professional Blood Glucose Monitoring System is designed to be accurate and easy to use. The...
EVENCARE PROVIEW METER OVERVIEW EVENCARE ProView Meter Front Display ‘M’ Button ‘C’ Button Test Strip Slot EVENCARE ProView Meter Back Battery Serial Port Compartment Cover Label Test Strip Ejector...
METER DISPLAY SCREEN Low Battery Warning Stored Test Results Test Results Unit of Measure Temperature Error Beeping Sound Muted Ready to Test Control Solution Average Result Month/Date Time...
EVENCARE ProView Glucose Control Solution is the standard glucose concentration solution required to perform a control solution test It is available at two levels, EVENCARE ProView Level 2 Glucose Control Solution and EVENCARE ProView Level 3 Glucose Control Solution Run the control...
Page 8
Step 6. Eject the test strip into a proper waste container IMPORTANT » Use only EVENCARE ProView Glucose Control Solutions with the EVENCARE ProView Blood Glucose Test Strips Other brands of control solutions will produce inaccurate results » Always check the expiration date of the control solution DO NOT use expired control solution »...
BLOOD GLUCOSE TESTING MATERIALS NEEDED: » EVENCARE ProView Meter » A new EVENCARE ProView Blood Glucose Test Strip » Auto-disabling single-use lancing device IMPORTANT Users need to adhere to standard precautions when handling or using this device All parts of the glucose...
250 mg/dL or less than 50 mg/dL and the patient DOES NOT feel ill: » Test again using a new test strip » Call the Medline Technical Service Center at 1-866-274-2131 IMPORTANT » Inaccurate results may occur in severely hypotensive individuals or patients in shock »...
USING THE METER MEMORY The EVENCARE ProView Meter automatically stores up to 300 glucose test results together with the date and time The meter also provides a 14 day average to help track a patient’s blood glucose trend The time and date must be set in order to use the memory and day averaging function MATERIALS NEEDED: »...
» DO NOT try to get moisture on the test strip, test strip slot or serial port » DO NOT take the EVENCARE ProView Meter apart Doing so will void the warranty If there are technical problems or questions in the use of the meter, contact Medline Technical Service Center at 1-866-274-2131 between 8:00 am and 5:00 pm (Central Time), Monday through Friday »...
Page 13
The EVENCARE ProView Meter should be cleaned and disinfected between each patient. MATERIALS NEEDED: » EVENCARE ProView Meter » Gloves » An EPA-registered disinfecting wipe, such as CaviWipes® The CaviWipes disinfectant products have been shown to be safe in disinfecting the ProView system Other EPA-...
CHANGING THE BATTERIES MATERIALS NEEDED: » EVENCARE ProView Meter » Two 3V Lithium coin cell batteries (CR2032) Step 1. Remove the battery compartment cover Step 2. If there are old batteries in the compartment, take them out Insert new batteries with the plus (+) side facing up Step 3.
TROUBLESHOOTING WHAT YOU SEE WHAT IT MEANS WHAT YOU SHOULD DO The meter has detected a problem Repeat the test with with the test strip The test strip a new test strip is either used or damaged Remove and discard the test strip The blood sample was applied and insert a new one Apply blood to the test strip before the blood...
Page 16
WHAT YOU SEE WHAT IT MEANS WHAT YOU SHOULD DO Wash and dry your hands and repeat the test on the patient’s Glucose test result is higher fingertip with a new test strip than 600 mg/dL If the result is still “HI,” contact the patient’s physician or healthcare provider Wash and dry your hands and...
WARRANTY The EVENCARE ProView Blood Glucose Meter is warranted to be free of defects in workmanship and materials for a period of three (3) years from the date of purchase Medline’s liability for warranty claims is limited to repair or replacement, and in no event...
IN-SERVICE GUIDE The success of any bedside glucose-monitoring program depends on having consistent, well-documented methods, and procedures for testing and recording results. This easy-to-follow guide will help you develop a strong, successful program.
2 Be familiar with the EVENCARE ProView test strip packaging and location of the lot number, expiration date, and control solution ranges 3 Be familiar with the proper handling, insertion, and storage of the EVENCARE ProView test strips 4 Check performance of the meter using control solutions...
CERTIFIED INSTRUCTOR: Complete one checklist for each operator-trainee Before signing this checklist, the trainee must meet objectives as listed below A. Familiarization with Components of the EVENCARE ProView Blood Glucose Monitoring System 1. EVENCARE ProView Meter □ Features (test strip port, test strip ejector, battery compartment and screen) □...
For vial test strips, the vial cap should be closed immediately after removing a test strip from the vial to avoid any degrading or contamination of the test strips 6 How long is the test time on the EVENCARE ProView meter? 7 Where can you find information to troubleshoot error messages? a User’s Guide...
EVENCARE ProView needs to be calibrated/coded 2 What is the purpose of testing with control solutions? To validate that the EVENCARE ProView meter is working properly with the test strips. 3 When performing a control solution test, you should: a Apply the control solution direct from the bottle to the test strip b.
EVENCARE PROVIEW BLOOD GLUCOSE MONITORING SYSTEM Nurse In-service Training Record The healthcare professionals listed below have been trained to use the EVENCARE ProView Blood Glucose Monitoring System: Certified Trainer’s Name DATE HEALTHCARE UNIT/STATION CERTIFIED TRAINER’S PROFESSIONAL’S NAME INITIALS...
MONITORING SYSTEM Certified Instructor Record The following individuals have undergone the appropriate training on the EVENCARE ProView Blood Glucose Monitoring System and are certified to serve as instructors in blood glucose monitoring using the EVENCARE ProView Blood Glucose Monitoring System They are qualified to perform initial training of certified operations,...
1 Select and prepare the finger-stick site correctly □ □ 2 Use lancet/lancing device correctly □ □ 3 Insert EVENCARE ProView test strip into EVENCARE ProView meter correctly □ □ 4 Apply blood to test strip correctly □ □ 5 Dispose of lancet correctly □...
Need help?
Do you have a question about the EVENCARE ProView and is the answer not in the manual?
Questions and answers
We use the Evencare G3 Glucometer at our organization. We have been using the purple-top sani-wipes to clean the meter. However, when I look at the EPA numbers it is not the same as what you have in your MIFU. Are these wipes approved for cleaning of those meters?