Blood Glucose Monitoring System with Voice Guidance El Sistema de Monitoreo de Glucemia EvenCareG2 Man- Con Guía de Voz USER’S GUIDE/GUÍA DE USUARIO...
Page 3
EvenCareG2 Dear EvenCare G2 Owner Dear EvenCare G2 Owner, Thank you for choosing the EvenCare G2 Blood Glucose Monitoring System to help you in monitoring your diabetes. We designed the EvenCare G2 Blood Glucose Monitoring System to be accurate and easy to use.
Page 4
It is not intended for the diagnosis or screening of diabetes or for neonatal use. IMPORTANT: • Alternate Site Testing (AST) with the EvenCare G2 Blood Glucose Monitoring System can be used only during steady-state blood glucose conditions. • Dehydration – Severe dehydration may lead to inaccurate blood glucose test results.
Table of Contents Understanding Your New Blood Glucose System The EvenCareG2 Meter Meter Display Screen The EvenCare G2 Test Strip EvenCare G2 Glucose Control Solution (Recommended) Setting Up Your New System The Set Up Screen Setting the Clock Setting the Alarms...
Page 6
EvenCareG2 Table of Contents Cleaning and Disinfecting the Meter and Lancing Device Storage and Precautions Solving Problems Product Warranty Specifications...
EvenCareG2 Understanding Your New Blood Glucose System Understanding Your New Blood Glucose System The EvenCare G2 Blood Glucose Monitoring System contains the following items if it arrives as a meter only system: • EvenCare G2 Meter • User’s Guide • Carrying Case...
EvenCareG2 Understanding Your New Blood Glucose System The EvenCareG2 Meter Test Strip Port Insert test strip (see page 36) to turn on the meter. Meter Display Shows your blood glucose test results, memory values, averages, and other messages. Enter ( ) and buttons ▲▼...
Page 9
EvenCareG2 Understanding Your New Blood Glucose System Battery Compartment Holds two AAA batteries. Data Port This function is not yet available.
EvenCareG2 Understanding Your New Blood Glucose System Meter Display Screen BATTERY CABLE Appears when batteries need to Indicates the meter is in data be changed (see page 44). transfer mode to PC*. *This function is not available yet. Will appear on the display screen after the last recorded test result, if less then 300 readings are stored.
Page 11
EvenCareG2 Understanding Your New Blood Glucose System BEEPER Set sound volume (see page 20). TEMPERATURE Appears when it is either too hot or too cold to test (outside the ranges of 50˚F-104˚F). CLOCK Indicates the meter is ready to set up time and date (see page 15). VOICE Indicates the voice feature is on (see page 20).
The EvenCare G2 Test Strips are glucose specific, biosensor-based test strips that require very little blood sample to quickly test glucose in fresh capillary whole blood. The test results are plasma-calibrated for easy comparison to lab results, however results may be 10% to 15% higher than results obtained from whole-blood referenced blood glucose assays.
EvenCare G2 Glucose Control Solution is the standard glucose concen- tration solution required to perform a glucose control solution test (See Control Solution Testing). It is available at 2 levels. EvenCare G2 LOW Glucose Control Solution helps you to validate the performance of your...
Setting Up Your New System The Setup Screen The Setup Screen of the EvenCare G2 Meter lets you take advantage of the advanced functions of this meter. Simply use ▲▼buttons to navigate to the desired function icon, and press the Enter ( ) button to enter the function when the icon is flashing.
You will need: √ Your EvenCare G2 Meter NOTE If date and time on the EvenCare G2 Meter has not been set, test and control results will not be stored in memory. Step 1: Press and hold Enter ( ) to turn on the meter.
Page 16
EvenCareG2 Setting Up Your New System mo /dL mo /dL mg /dL Step 4: Set the Month mg/dL mg/dL mg /dL The current month will flash. If the voice function is code code code on, the meter will say, “Set month.” Press ▲or▼ to select the correct month.
Page 17
▲or▼ to select the correct minutes. Press Enter ) to confirm your choice and finish setting the clock. NOTE: • Anytime during set up, inserting a EvenCare G2 Test Strip will begin testing. Any changes made so far are stored. mo /dL mo /dL mg/dL •...
EvenCareG2 Setting Up Your New System Setting the Alarms You can set up to three alarms on the EvenCare G2 Meter. You must set the clock before you can set the alarms. When an alarm sounds, mg/dL mg/dL mg /dL mg /dL the meter will turn on and a melody will sound for 30 seconds.
Page 19
• Alarm settings will not be erased when changing batteries. Begin testing by inserting a EvenCare G2 Blood Glucose Test Strip (see page 32, Testing Your Blood Glucose), or press and hold Enter ( ) to turn off the meter, or see the next section on how to set up the voice feature on your meter.
EvenCareG2 Setting Up Your New System “Language selection.” language to exit language selection. English and Spanish are the two language options available.
EvenCareG2 Voice Function Table Voice Function Table The voice function can be used as an aid for you to hear the test results. The following table lists when the meter will speak and what the meter will say. WHEN the meter will speak… WHAT the meter will say…...
Page 23
EvenCareG2 Voice Function Table WHEN the meter will speak… WHAT the meter will say… “Temperature is out of range.” Temperature is out of range (between 50˚F-104˚F). Melody will sound. When the meter is turned off. Test Strip is inserted and press ▲ or ▼ (CTL showing next to the test strip icon) .
Page 24
EvenCareG2 Voice Function Table Setting Meter Functions via the Setup Screen (see page 14, setting up your new system) Pressing Enter ( ) to enter setup screen (after the meter has been turned on) ▲ ▲ Memory Exit Function Language Recall Mode Selection...
Page 25
EvenCareG2 Voice Function Table WHEN the meter will speak… WHAT the meter will say… “Set minutes.” During date and time setup, setting up the minutes. “The date and time is (year) After finishing setting up date (month) (date) (hour) (minutes).” and time.
Page 26
EvenCareG2 Voice Function Table Other warning messages (see page 49, Solving Problems) WHEN the meter will speak… WHAT the meter will say… “Please set date and time” Meter date and time has not been set. “Error 1 meter failure” Meter failure. “Error 3 used test strip”...
You should perform control solution testing when: • Using the meter for the first time. • Using a new bottle of EvenCare G2 Blood Glucose Test Strips. • You left the test strip bottle cap open for awhile. • You dropped the meter.
Page 28
mo /dL mo /dL EvenCareG2 Control Solution Testing IMPORTANT: code code code • Check the expiration date printed on the test strip bottle. Do not use expired test strips. • Use each test strip immediately after removing it from the bottle. •...
Page 29
EvenCareG2 Control Solution Testing DO NOT touch the sampling end of the test strip with the bottle of control solution. See illustration of sampling end below. Step 5: Gently touch the tip of the test strip to the drop of control solution. The meter will beep indicating it has received the control solution.
Page 30
EvenCareG2 Control Solution Testing Step 8: Take out an EvenCare G2 Test Strip from the test strip bottle and close the bottle immediately. Insert the test strip to turn on the meter. Step 9: Wait until the flashing blood drop and arrow icons appear on the meter display screen.
If your control solution result is out of range (too high or too low), it may be caused by the following: Possible Causes What you can do… • Wrong brand of • Make sure you are using EvenCare G2 control solution Control Solution. being used. • Control solution •...
You will need: √ Your EvenCare G2 Meter √ A new EvenCare G2 Blood Glucose Test Strip √ Lancing device with a clean, unused lancet (or safety lancets) √ Clear cap for Alternate Site Testing (AST) on palm and forearm Before you begin, make sure: •...
Page 33
EvenCareG2 Testing Your Blood Glucose NOTE: • For fingertip testing, use the opaque adjustable cap. • For alternate site testing on palm and forearm, use the clear adjustable cap. Step 3: Adjust the depth setting on the adjustable cap for the puncture depth level (1 is the lightest and 5 is the deepest).
EvenCareG2 Testing Your Blood Glucose Important Information on Alternate Site Testing (AST) The EvenCare G2 Blood Glucose Monitoring System can test for blood glucose from areas other then your fingertip such as palm and forearm (alternate site testing, or AST).
Page 35
EvenCareG2 Testing Your Blood Glucose NOTE: • Rubbing forearm until warm before lancing will help minimize the difference with fingertip test results. The palm (at the base of the thumb) does not require rubbing before testing. • If results from alternate site testing do not agree with how you feel, use fingertip testing instead.
EvenCareG2 Testing Your Blood Glucose Performing a Blood Glucose Test Step 1: Take out an EvenCare G2 Test Strip from the test strip bottle and close the bottle immediately. mo /dL Insert the test strip to turn on the meter.
Page 37
EvenCareG2 Testing Your Blood Glucose For Fingertip Testing: Hold the lancing device (use the white adjustable cap or safety lancet) against the side of your fingertip and press the release button to create a puncture. TIP: • Gently massage your hand and finger toward the puncture site to form a drop of blood.
Page 38
EvenCareG2 Testing Your Blood Glucose For Testing on Palm and Forearm: Hold the lancing device (use the clear adjustable cap) against the test site (base of palm or forearm). Avoid a test site that has veins, moles, excessive hair, or bone. ↓...
Page 39
EvenCareG2 Testing Your Blood Glucose Step 4: Gently bring the test strip and touch the drop of blood at a slight angle. The test strip acts like a straw to pull the blood in. Keep the test strip in the blood drop until the meter beeps to indicate the test strip has enough blood to test.
EvenCareG2 Understanding Your Blood Glucose Test Results Understanding Your Blood Glucose Test Results Blood glucose values will vary depending on food intake, medication, health, stress, and exercise. The ideal range for adults with and without diabetes should be • 70 to 100 mg/dL before meals, and •...
EvenCareG2 Viewing Your Meter’s Memory Viewing Your Meter’s Memory Your EvenCare G2 Meter automatically stores up to 300 test and control results with date and time. The meter also provides 7, 14, and 30 day mg/dL averaging to help track your blood glucose trend. You must set up the date and time on your meter properly to use the memory and day averaging function, see Setting the Clock on page 15.
EvenCareG2 Viewing Your Meter’s Memory code code code code END will appear on the display screen after the last recorded test result if less then 300 readings are stored. You can press ▼ to go back viewing from the oldest to the most recent readings. mol/dL mmol/dL mol/dL...
Page 43
EvenCareG2 Viewing Your Meter’s Memory NOTE: • Control test results are flagged by ctl on the bottom left corner of the display screen in addition to MEM. • When the meter memory is blank, the display screen will show nil. •...
EvenCareG2 Caring for the Meter Caring for the Meter Caring for your EvenCare G2 Meter is easy. Follow these simple guidelines to keep your meter working properly. code Changing the Battery Batteries need to be changed when the icon appears on the meter display.
Page 45
EvenCareG2 Caring for the Meter Your EvenCare G2 Meter and lancing device are validated to withstand a cleaning and disinfection cycle of ten times per day for an average period of three years. The following products are validated for disinfecting the EvenCare G2 meter and lancing device: •...
Page 46
4. To disinfect your meter, clean the meter with one of the validated disinfecting wipes listed below. Other EPA registered wipes may be used for disinfecting the EvenCare G2 system, however these other wipes have not been validated and could affect the performance of your meter.
Page 47
• Do not flush disinfecting wipes down toilet. IMPORTANT: If you notice any of the below signs after cleaning and disinfecting your meter or lancing device; stop using the device and call Medline Technical Service immediately at 1-866-274-2131: • Control solution out of range.
• Do not take the meter apart as doing so will void the warranty. If there are technical problems or questions, please call Medline’s Technical Service Center at 1-866-274-2131 Monday through Friday between 8:00 a.m. and 5:00 p.m.(Central Time). Contact your...
Solving Problems This section details the significant display screen messages and error mmol/dL mol/dL mmol/dL mol/dL mg /dL codes you will encounter when using your EvenCare G2 meter and EvenCare G2 test strips. code What What the What it What Should...
Page 50
EvenCareG2 Solving Problems What What the What it What Should mg /dL You See meter says Means You Do “Low Batteries Change the battery Battery” are low. according to page 44, Changing the Battery. Move the meter into an “Tempera- Temperature area that is between ture is out...
Page 51
EvenCareG2 code Solving Problems What What the What it What Should You See meter says Means You Do mmol/dL mol/dL mmol/dL mol/dL mg /dL There are no • Check to see if the date and time on your Applicable results in the meter are set up.
EvenCareG2 Product Warranty Product Warranty The EvenCare G2 Blood Glucose Meter is warranted to be free of defects in workmanship and materials for a period of five (5) years from the date of purchase. Medline’s liability for warranty claims is...
Automatic Power-off: After 2 minutes of nonuse Operating Temperature: 50˚F to 104˚F Relative Humidity: Less than 85% Storage Condition: Meter at 39˚F - 122˚F Test Strips at 39˚F - 86˚F For additional information, refer to the EvenCare G2 Test Strip insert.
Page 54
EvenCareG2 Estimado propietario del medidor EvenCare G2...
Page 55
Estimado propietario del medidor EvenCare G2 Gracias por elegir el sistema de monitorización de la glucemia EvenCare G2 como ayuda para el control de su diabetes. El sistema de monitorización de la glucemia EvenCare G2 fue diseñado para ofrecer precisión y facilidad de uso. Tiene además una conveniente función de voz que los usuarios con limitaciones visuales pueden...
Estimado propietario del medidor EvenCare G2 Uso previsto El sistema de monitorización de la glucemia EvenCare G2 está previsto para la medición cuantitativa de la glucosa en muestras de sangre entera capilar fresca obtenidas de las yemas de los dedos, el antebrazo o la palma de la mano.
Page 57
Cómo funciona su nuevo sistema de medición de la glucemia Medidor EvenCareG2 Pantalla del medidor Tira reactiva EvenCare G2 Solución de control de glucosa EvenCare G2 (recomendada) Configuración de su nuevo sistema Pantalla de configuración Ajuste del reloj Configuración de las alarmas Función de voz y llamador (beeper)
Page 58
EvenCareG2 EvenCareG2 Índice Cuidado del medidor Reemplazo de las baterías Limpieza y desinfección del medidor y del dispositivo de punción Almacenamiento y precauciones Solución de problemas Garantía del producto Especificaciones...
Cómo funciona su nuevo sistema de medición de la glucemia Cómo funciona su nuevo sistema de medición de la glucemia El sistema de monitorización de la glucemia EvenCare G2 contiene los siguientes elementos si se recibe como un sistema de medición solamente: •...
EvenCareG2 EvenCareG2 Cómo funciona su nuevo sistema de medición de la glucemia Medidor EvenCareG2 Ranura para tira reactiva Inserte la tira reactiva (ver página 88) para encender el medidor. Pantalla del medidor Muestra los resultados de su prueba de medición de la glucemia, los valores almacenados en la memoria, los promedios y otros mensajes.
Page 61
EvenCareG2 EvenCareG2 Cómo funciona su nuevo sistema de medición de la glucemia Compartimento para las baterías Lleva dos baterías AAA. Puerto de datos Está función aún no está disponible.
EvenCareG2 EvenCareG2 Cómo funciona su nuevo sistema de medición de la glucemia Pantalla del medidor BATERÍA CABLE Aparece cuando se deben Indica que el medidor se reemplazar las baterías encuentra en modo de (ver página 96). transferencia de datos a la PC*. *Está...
Page 63
EvenCareG2 EvenCareG2 Cómo funciona su nuevo sistema de medición de la glucemia ALTAVOZ Ajuste del volumen del sonido (ver página 72). TEMPERATURA Aparece cuando la temperatura ambiente es demasiado alta o demasiado baja para hacer la prueba (fuera del rango de temperatura de 10 ˚C-40 ˚C [50 ˚F-104 ˚F]).
Page 64
Las tiras reactivas EvenCare G2 contienen un biosensor, son específicas para glucosa y requieren una muestra muy pequeña de sangre para la determinación rápida del nivel de glucosa en sangre entera capilar fresca.
Servicio de Atención al Cliente de Medline para hacer un pedido. La solución de control de glucosa EvenCare G2 es la solución con una concentración estándar de glucosa requerida para realizar una prueba con solución de control de glucosa (ver "Prueba con la solución de control").
Configuración de su nuevo sistema Configuración de su nuevo sistema Pantalla de configuración La pantalla de configuración del medidor EvenCare G2 le permite aprovechar las funciones avanzadas del medidor. Simplemente use los botones ▲▼ para navegar hasta el icono correspondiente a la función deseada, y presione el botón Enter ( ) para ingresar a la función...
Necesitará: mmol/dL √ Su medidor EvenCare G2 NOTA Si no se ha ajustado la fecha y hora en el medidor EvenCare G2, los resultados de la prueba y del control no se almacenarán en la memoria. Paso 1: mo /dL...
Page 68
EvenCareG2 EvenCareG2 Configuración de su nuevo sistema mo /dL mo /dL mg /dL Paso 4: Ajuste el mes mg/dL mg/dL mg /dL El mes actual parpadeará. Si la función de voz ha code code code sido activada, el medidor dirá “Ajuste el mes”. Presione ▲o▼para seleccionar el mes correcto.
Page 69
) para confirmar su selección y finalizar el ajuste del reloj. NOTA: • Si se inserta una tira reactiva EvenCare G2 en cualquier momento durante el procedimiento de ajuste, se iniciará una prueba. Se almacenará cualquier cambio hecho hasta ese momento.
EvenCareG2 EvenCareG2 Configuración de su nuevo sistema Configuración de las alarmas Puede configurar hasta tres alarmas en el medidor EvenCare G2. Debe ajustar el reloj antes de que sea posible configurar las alarmas. Cuando mg/dL mg/dL mg /dL mg /dL suena una alarma, se enciende el medidor y se escuchará...
Page 71
• La configuración de las alarmas no se borra cuando se reemplazan las baterías. Inicie la prueba insertando una tira reactiva para glucemia EvenCare G2 (ver página 84, "Medición de la glucemia"), o presione y mantenga presionado Enter ( ) para apagar el medidor, o bien consulte la sección siguiente para ver cómo configurar la función de voz...
EvenCareG2 EvenCareG2 Tabla de la función de voz Tabla de la función de voz La función de voz puede utilizarse como ayuda para escuchar los resultados de las pruebas. La tabla siguiente indica cuándo hará anuncios verbales el medidor y qué dirán los anuncios. CUÁNDO hará...
Page 75
EvenCareG2 EvenCareG2 Tabla de la función de voz CUÁNDO hará anuncios QUÉ dirán los anuncios... verbales el medidor... "La temperatura está fuera La temperatura ambiente está de rango". fuera de rango (entre 10 ˚C-40 ˚C [50 ˚F-104 ˚F]). Sonará una melodía. Cuando el medidor está...
Page 76
EvenCareG2 EvenCareG2 Tabla de la función de voz Configuración de las funciones del medidor a través de la pantalla de configuración (ver página 66, "Configuración de su nuevo sistema") Se presiona Enter ( ) para entrar en la pantalla de configuración (después de haber encendido el medidor) ▲...
Page 77
EvenCareG2 EvenCareG2 Tabla de la función de voz QUÉ dirán los anuncios... CUÁNDO hará anuncios verbales el medidor... "Ajuste los minutos". Durante el ajuste de fecha y hora, al ajustar los minutos. “La fecha y la hora es (año) (mes) Luego de completar el ajuste (día) (hora) (minutos)”.
Page 78
EvenCareG2 EvenCareG2 Tabla de la función de voz Otros mensajes de advertencia (ver página 101, "Solución de problemas") QUÉ dirán los anuncios... CUÁNDO hará anuncios verbales el medidor... "Ajuste la fecha y la hora". La fecha y la hora del medidor no han sido ajustadas.
• NO CONGELAR. Almacene las soluciones de control a temperatura ambiente. Necesitará: √ Solución de control de glucosa EvenCare G2 (para rango alto y bajo) √ Su medidor EvenCare G2 √ Una tira reactiva nueva para glucemia EvenCare G2 Paso 1: Extraiga una tira reactiva EvenCare G2 del envase de tiras reactivas y cierre el envase inmediatamente.
Page 80
EvenCareG2 EvenCareG2 Prueba con la solución de control mo /dL mo /dL IMPORTANTE: • Verifique la fecha de vencimiento impresa en el envase de las tiras reactivas. No utilice tiras reactivas con fecha vencida. • Utilice cada tira reactiva inmediatamente después de sacarla code code code...
Page 81
EvenCareG2 EvenCareG2 Prueba con la solución de control NO toque el extremo de muestreo de la tira reactiva con el envase de solución de control. Vea abajo la ilustración del extremo de muestreo. Sampling End Sampling End Paso 5: Toque delicadamente la gota de solución de control con el extremo de la tira reactiva.
Page 82
EvenCareG2 EvenCareG2 Prueba con la solución de control Paso 8: Saque una tira reactiva EvenCare G2 del envase de tiras reactivas y cierre el envase inmediatamente. Inserte la tira reactiva para encender el medidor. Paso 9: Espere hasta que aparezcan los iconos gota de sangre y flecha parpadeando en la pantalla del medidor.
• Funcionamiento • Si el problema persiste, llame al Centro defectuoso del de Servicio Técnico de Medline al número medidor. 1-866-274-2131, de lunes a viernes entre 8:00 a. m. y 5:00 p. m. (hora central...
Medición de la glucemia Necesitará: √ Su medidor EvenCare G2 √ Una tira reactiva nueva para glucemia EvenCare G2 √ Dispositivo de punción, con una lanceta nueva limpia (o lancetas de seguridad) √ Tapa transparente para la medición en lugares alternativos (AST), es decir en la palma y el antebrazo Antes de comenzar, asegúrese de:...
Page 85
EvenCareG2 EvenCareG2 Medición de la glucemia NOTA: • Para una prueba en la yema de los dedos, use la tapa ajustable opaca. • Para la medición en lugares alternativos, como la palma de la mano o el antebrazo, use la tapa ajustable transparente. Paso 3: En la tapa ajustable, regule el nivel de profundidad de la punción (1 es el más...
Información importante sobre la medición en lugares alternativos (AST) El sistema de monitorización de la glucemia EvenCare G2 puede utilizarse para realizar pruebas en zonas que no sean las yemas de los dedos, tales como la palma de la mano y el antebrazo (medición en lugares...
Page 87
EvenCareG2 EvenCareG2 Medición de la glucemia • Cree que tiene la glucemia baja. • Los resultados de su AST no concuerdan con cómo se siente usted. • Está haciendo la prueba para determinar la presencia de hiperglucemia. • Sus resultados para niveles de glucosa son habitualmente fluctuantes.
Medición de la glucemia Realización de la prueba de medición de la glucemia Paso 1: Extraiga una tira reactiva EvenCare G2 del envase de tiras reactivas y cierre el envase inmediatamente. Inserte la tira reactiva para encender el medidor. mo /dL IMPORTANTE: •...
Page 89
↓ EvenCareG2 EvenCareG2 Medición de la glucemia Para la prueba en la yema del dedo: Sostenga el dispositivo de punción (use la tapa ajustable blanca o la lanceta de seguridad) contra la yema del dedo y presione el botón de liberación para efectuar una punción. CONSEJO PRÁCTICO: •...
Page 90
EvenCareG2 EvenCareG2 Medición de la glucemia Para la prueba en la palma y el antebrazo: Sostenga el dispositivo de punción (use la tapa ajustable transparente) contra el lugar de la prueba (base de la palma o antebrazo). Evite un lugar de prueba que tenga venas, lunares, ↓...
Page 91
EvenCareG2 EvenCareG2 Medición de la glucemia Paso 4: Acerque suavemente la tira reactiva con un ligero ángulo y toque la gota de sangre. La tira reactiva actúa como elemento que absorbe la sangre hacia su interior. Mantenga la tira reactiva en la gota de sangre hasta que el medidor emita un pitido para indicar que la tira reactiva tiene suficiente sangre para la prueba.
Interpretación de los resultados de la prueba de medición EvenCareG2 EvenCareG2 de la glucemia Interpretación de los resultados de la prueba de medición de la glucemia Los valores de glucemia varían según la ingesta de alimentos, los medicamentos, la salud, el estrés y el ejercicio. El rango de valores ideal para adultos con y sin diabetes deber ser de •...
EvenCareG2 Cómo examinar la memoria del medidor Cómo examinar la memoria del medidor Su medidor EvenCare G2 almacena automáticamente hasta 300 resultados de pruebas y controles con su fecha y hora. El medidor mg/dL también proporciona promedios de 7, 14 y 30 días para facilitar el control de las tendencias de los valores de glucemia.
Page 94
EvenCareG2 EvenCareG2 Cómo examinar la memoria del medidor code code code code END (FIN) aparecerá en la pantalla después del último resultado de una prueba registrado si hay menos de 300 valores guardados. Puede presionar ▼ para retroceder, y ver sucesivamente desde el mol/dL mmol/dL mol/dL...
Page 95
EvenCareG2 EvenCareG2 Cómo examinar la memoria del medidor NOTA: • Los resultados de la prueba de control se señalan con ctl en el ángulo inferior izquierdo de la pantalla, además de MEM. • Cuando la memoria del medidor está vacía, la pantalla mostrará nil. •...
EvenCareG2 EvenCareG2 Cuidado del medidor Cuidado del medidor Cuidar su medidor EvenCare G2 es sencillo. Siga estás pautas simples para mantener el buen funcionamiento de su medidor. code Reemplazo de las baterías Se deben reemplazar las baterías cuando el icono aparezca en la pantalla del medidor.
Page 97
Internet o por teléfono llamando al 1-866-274-2131. Si bien se pueden usar otras toallitas con registro EPA para desinfectar el sistema EvenCare G2, estas no han sido validadas y podrían afectar el rendimiento de su medidor. Si usa toallitas con registro EPA no incluidas en la lista anterior y nota cualquiera de los siguientes signos después de limpiar y desinfectar su medidor, suspenda el uso del...
Si bien se pueden usar otras toallitas con registro EPA para desinfectar el sistema EvenCare G2, estas otras no han sido validadas y podrían afectar el rendimiento de su medidor. • Toallas con lejía desinfectantes Dispatch para uso hospitalario ®...
Page 99
Si después de limpiar o desinfectar el medidor o el dispositivo de punción nota algunos de los signos que se mencionan a continuación, suspenda el uso del dispositivo y llame inmediatamente al Servicio Técnico de Medline al 1-866-274-2131: • Solución de control fuera de rango. • Pantalla LCD del medidor borrosa.
• No desarme el medidor, ya que anulará la garantía. Si tiene problemas técnicos o preguntas, llame al Centro de Servicio Técnico de Medline al 1-866-274-2131, de lunes a viernes entre 8:00 a. m. y 5:00 p. m. (hora central de EE. UU.). En otros horarios,...
Solución de problemas Esta sección describe los mensajes de pantalla y códigos de error mmol/dL mol/dL mmol/dL mol/dL mg /dL importantes que usted encontrará al usar su medidor EvenCare G2 y las tiras reactivas EvenCare G2. Qué Qué dice Qué Qué verá...
Page 102
EvenCareG2 EvenCareG2 Solución de problemas mg /dL mmol/dL mol/dL mg /dL Qué Qué dice Qué Qué verá el medidor significa debe hacer mg/dL mg/dL mg /dL mg /dL Cantidad "Error 4, • Retire la tira reactiva insuficiente la muestra y repita la prueba de muestra no es con una nueva tira...
Page 103
EvenCareG2 EvenCareG2 Solución de problemas Qué Qué dice Qué Qué verá el medidor significa debe hacer mg /dL code "Su nivel El resultado Lave y seque sus manos de glucemia de la prueba y repita la prueba en es inferior es inferior su dedo con una tira a 20 mg/dl".
El medidor de glucemia EvenCare G2 está garantizado contra defectos de mano de obra y de materiales durante un período de cinco (5) años a partir de la fecha de compra. La responsabilidad de Medline por reclamos de garantía estará limitada a la reparación o reemplazo del producto, y en ningún caso Medline será...
EvenCareG2 EvenCareG2 Especificaciones Especificaciones Tiras reactivas: Tiras reactivas para glucemia EvenCare G2 Rango de la prueba: 20-600 mg/dl Calibración: Plasma Tiempo de la prueba: 6 segundos Tamaño de la muestra: Mayor de 1 ul Rango de hematocrito: 30-55 % Tipo de pantalla:...
Need help?
Do you have a question about the evencare g2 and is the answer not in the manual?
Questions and answers