Garmin VARIA Owner's Manual page 20

2
Select the device key to cycle through the
bike light intensity and pattern modes.
Taillight modes include smart mode, high,
medium, low, and flash. Headlight modes
include smart mode, overdrive, high,
medium, low, and flash.
NOTE: Taillight medium and flash modes
are available on the Varia™ TL 300 device
only. Headlight overdrive and flash modes
are available on the Varia HL 500 device
only.
3
Hold the device key for 2 seconds to turn
off the device.
The next time you turn on the device, it
enters the last-used operating mode.
Pairing Varia Bike Lights with Your
Edge 1000
Before you can pair the devices, you must
update the Edge software.
1
Bring the Edge device within range (3 m) of
the sensor.
NOTE: Stay 10m away from other ANT+®
bike lights while pairing.
2
Turn on the Edge device.
3
From the home screen, select >/< >
Sensors > Add Sensor > Varia.
4
Turn on the Varia device.
5
Select the Varia device key to enter smart
mode.
The status LED flashes blue.
6
Select your sensor.
8
Instructions