Siemens Simatic S7-1500 / ET 200MP Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 8 electrically isolated analog inputs
● Voltage measurement type can be set per channel
● Current measurement type can be set per channel
● Two operating modes
– Fast: shortest integration time 2.5 ms
– Standard: shortest integration time 7.5 ms
● Resolution 16 bits including sign
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module internal Shared Input (MSI)
Configurable submodules / submodules for
Shared Device
Measuring range adjustment
Scaling of measured values
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
12
Firmware version
of the module
(TIA Portal) as of V13,
SP1 and HSP 0166
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
V1.1.0 or higher V14 or higher and HSP
(only PROFINET IO)
Analog Input Module AI 8xU/I HF (6ES7531-7NF00-0AB0)
Configuration software
STEP 7 GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
0186
(PROFINET IO only)
Manual, 09/2016, A5E36649087-AB
--- / X
X
X
X
X
X