Auto-Clock Feature; Auto-(Phase/Position); Auto-(Clock/Position); Auto-Level - Philips MCL1801 Series User Manual

Enabled
Disabled
Only Once

6.3.13 Auto-Clock Feature

1) Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options.
The Auto-Clock Feature window appears.
2) Press Adjust + or Adjust - button until the desired item is highlighted
3) Press the Enter button to confi rm your selection and return to Auto-Setup Options window
Enabled
Disabled

6.3.14 Auto-(Phase/Position)

1) Press Enter button when the Auto-(Phase/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-(Clock/Position).

6.3.15 Auto-(Clock/Position)

1) Press Enter button when the Auto-(Clock/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-Level.

6.3.16 Auto-Level

1) Press Enter button when the Auto-Level is highlighted on Advanced.
To perform an automatic calibration of the video signal.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust.
MCL1801
Auto-Setup On Modest
Enabled
Disabled
Only Once
Every time the video timing changes
Never
Only the fi rst time that the video timing is recognized.
Auto-Clock Feature
Enabled
Disabled
Every time the video timing changes
Never
22