Auto Filmmaker Mode
Set the Auto Filmmaker Mode
Settings > General settings > Auto Filmmaker
Mode.
Switch on Auto Filmmaker Mode to set Picture style
to Filmmaker Mode or HDR Filmmaker Mode
automatically when movie contents is detected.
Auto Film Mode
Enter the settings for the Auto film mode
Settings > General settings > Auto film Mode.
Set the method of detection
Settings > General settings > Auto Filmm Mode >
Film detection.
Select Off, From content or From AI detection to set
how to detect the movie content and then set the
Picture style automatically.
Set preferred Picture style
Settings > General settings > Auto Filmm Mode >
Preferred Picture style.
Select Filmmaker Mode or Home Cinema for the
Picture style that automatically set when movie
contents is detected.
HDMI Variable Refresh Rate
Set the HDMI Variable Refresh Rate
Settings > General settings > HDMI Variable
Refresh Rate.
Switch on HDMI Variable Refresh Rate will adjust the
panel refresh rate on-the-fly to match the source
device connected to the HDMI. This can produce a
smoother image with more consistent input lag and
no screen tearing.
Reset Settings and Reinstall
Reset all settings value to original settings
Settings > General settings > Factory settings.
Redo full installation , and set the status back to the
first time you switch on
Settings > General settings > Reinstall TV.
Enter PIN code and select Yes, the reinstall will be
completed.
All settings will be reset.
The installation can take a few minute
9.6
Clock, Region, and Language
Settings
Menu language
Change the language of the menu and messages
Settings > All settings > Region and language
> Menu language.
Clock
Settings > Region and language > Clock.
Correct clock automatically
Settings > Region and
language > Clock > Auto clock mode.
• The standard setting for the clock is Automatic. The
time information comes from the broadcasted UTC -
Coordinated Universal Time information.
• If the clock is not correct, you can set the clock
manually.
Correct clock manually
Settings > Region and
language > Clock > Auto clock mode > Manual.
Settings > Region and
language > Clock > Date, Time.
Go to previous menu, and select Date and Time to
adjust the value.
Note:
• If none of the automatic settings display the time
correctly, you can set the time manually.
Switch to Standby automatically after a preset time
Settings > Region and
language > Clock > Sleep timer.
33