Advertisement
CHARGING
BEFORE USING, READ THE IMPORTANT SAFETY INSTRUCTIONS IN THIS MANUAL.
1. Ensure the product is switched off. Connect the shaver to the adapter (Diagram A).
2. Connect to the mains (Diagram B) and charge for at least 24 hours when using for the first
time (Diagram C). This first charge is important to the shaver's battery life.
3. When plugged in, the charging indicator will light up.
4. When empty, the battery should be charged for 2 hours, and will provide 60 minutes of
shaving time.
5. To preserve the life of the batteries, allow them to fully discharge every six months, and then
recharge them for 24 hours.
CAUTION!
· Make sure the shaver and your hands are dry when charging the shaver.
· Always charge the shaver in a cool, dry place.
SHAVING
D
1. Press power button to turn on. (Diagram D)
2. Pull the trimmer release button to engage the trimmer, and use it to remove long hair first.
Then push the trimmer downward to lock it in when finished.
3. Shave the face and neck using short, circular strokes. (Diagram E). The independent flexing
foils will automatically adjust to the contours of your face.
4. After shaving, turn the shaver off by pressing the power button.
SHAVING TIPS
• Ensure your skin is free of oils.
• Wait at least 15 minutes after getting up before shaving, to ensure your face is free of
puffiness that may be present from sleeping.
• Always hold the shaver at a right angle to the skin so that the screens are touching the skin
with equal pressure.
• Stretch skin with the free hand so hairs stand upright, making it easier for them to enter the
cutting chamber.
• Use moderate to slow, circular stroking movements.
• The use of short, circular motions in stubborn areas may obtain a closer shave, especially
along the neck and chin line.
E
B E
4
Advertisement
