Shaving Tips - Remington BARBER'S BEST PRO Use & Care Manual

Power shaver
Table of Contents

Advertisement

will flash 5 times to indicate the lock is set. While the travel lock is set, if the on/off button
is pressed the LED display will flash 3 times to indicate the shaver is on travel lock mode.
To turn the travel lock off, press and hold the on/off button for 3 seconds. The LED display
will flash 3 times while the button is being pressed and then the shaver will turn on.
CHARGING
1.
Plug power cord adaptor into the charging stand (Diagram A).
2.
Place the shaver into the charge stand (Diagram B).
3.
Plug the adaptor into the wall outlet (Diagram C).
4.
Charge shaver for 24 hours before its first use. This first charge is important to the
shaver's battery life.
Note: During the initial charge ignore the electronic indicators as they are
in "Start Up Cycle".
5.
CAUTION
Make sure the shaver and your hands are dry when charging the shaver.
Always charge the shaver in a cool, dry place.
SHAVING
1.
Press power button to turn on.
2.
Shave face and neck using short, circular strokes.
3.
After shaving, turn the shaver off.

SHAVING TIPS

Remington's Barber's Best Pro Power Shaver is showerproof. You may use shaving
foam or gel with your shaver. You may also shave in the shower.
Wait at least 15 minutes after getting up before shaving, to ensure your face is free
of puffiness that may be present from sleeping.
Always hold the shaver at a right angle to the skin so that all three heads are
touching the skin with equal pressure.
Stretch skin with the free hand so hairs stand upright, making it easier for them to
enter the cutting chamber.
Use moderate to slow, circular stroking movement.
The use of short, circular motions in stubborn areas may obtain a closer shave,
especially along the neck and chin line.
Do not press hard against the skin to avoid skin irritation and/or damage to the rotary heads.
Note: When using the shaver with foams or gels it is important to rinse the
cutting head clean after each use. This will avoid having the foam or gel dry in
the cutting head and clogging the shaver.
C
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr1475au

Table of Contents