Declaration Of Conformity - Bosch IXO Original Instructions Manual

OBJ_BUCH-2249-002.book Page 32 Wednesday, January 20, 2016 5:16 PM
32 | English
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product described under
"Technical data" is in conformity with all relevant provisions of the directives
2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC. including their amendments and complies with
the following standards:
EN 50581, EN 60745-1, EN 60745-2-2 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
Battery Charging (see figure A)
 Do not use other battery chargers. The supplied battery charger is de-
signed for the Lithium-Ion battery in your machine.
1 609 92A 1NN | (20.1.16) Bosch Power Tools