ABB REC603 Product Manual page 14

Wireless Controller
REC601/603
Product version: 1.0
done using the Ethernet port and a RJ-45 cable
between the controlled device and the Wireless
Controllers REC601/603.
The Wireless Controllers REC601/603 have two
application serial ports. Serial port 1 is
configurable to either console or data mode and
supports only RS-232, while serial port 2 is
14
configurable to multiple serial modes
(RS-232/422/485). Serial port connectors are 9-
pin D-sub (male) connectors.
More information is available in the Technical Data
section of this product guide or technical manual
available at www.abb.com/substationautomation.
1MRS757423 A
ABB