Changing Cross References - ABB COM600 series Configuration Manual

3.4.5.
18
COM600 series, Version 4.1
FDIR Configuration Manual
Figure 3.4.4-1 Protection Setting Group

Changing cross references

In the Data Connection tab, you can view and manually change the cross reference of
FDIR variables.
The Variable column contains a list of variables used in the FDIR logic. The OPC item
contains the mappings for the variables in the OPC servers of the communication structure.
The data connection mapping is a table view of the logic processor cross reference, which
is generated by the FDIR configuration tool. The FDIR configuration tool uses data
connection information in the substation structure to find the corresponding switch data
object for the variables. Any change on the data connection table is reflected on the logic
processor cross reference.
To change the cross reference:
1. Select the row and click Change.
2. The Select Cross Reference dialog opens with a list of available data objects to
select, see Figure 3.4.5-2.
3. Select any data object on the list, and click OK.
1MRS757278
FDIR_setting_groups