How To Use The Color Camera; Restart The Computer; Reset The Computer - Honeywell DOLPHIN CT-50 Quick Start Manual

How to Use the Color Camera

1. Press the Camera button.
2. Select either single photo mode
in the viewfinder.
3. Point the camera lens at the object you want to capture. The camera lens
is located on the back of the computer.
4. Touch the single photo icon to capture a single photo.
Touch the video icon to start recording video. Select the shutter again to
stop recording.

Restart the Computer

You may need to restart the computer to correct conditions where an
application stops responding to the system or the computer seems to be
locked up.
1. Press and hold the Power button until "slide down to power off" appears
on the screen.
2. Slide the window down to the bottom of the screen. "Goodbye" appears
on the screen before the computer turns off.
To restart the computer if the touch panel display is unresponsive:
• Press and hold the Power + Volume Down buttons for approximately 8
seconds until the computer restarts.

Reset the Computer

For information on how to perform a Factory Reset (Clean Boot), see the
user guide.
, video mode , or burst mode