Optical Characteristics - Philips Brilliance 150X User Manual

150X Product Information
• Sync input signal
• Sync polarities
• Input Frequency
• Video interface
AUDIO
• Input signal levels
• Headphone out signal level
• Input signal connector
• Loudspeakers
MICROPHONE
• Sensitivity
• Output impedance
• Directivity
• Frequency range

OPTICAL CHARACTERISTICS

• Contrast ratio
• Brightness
• Peak contrast angle
• White Chromacity
• Viewing Angle (C/R >5)
• Response time
* These information are subject to change without notice.
file:///E|/Potomac/english/150x/product/product.htm (2 of 9) [8/9/2000 12:39:23 PM]
Separate sync
Composite sync
Sync on green
Positive and negative
XGA Hsync
SVGA Hsync
VGA Hsync
Dual input: It can be switching via OSD selection. DVI-I
(Integrated) interface, which both provides analog and digital
inteface.
0.7 Vpp
32 Ohm 20 + 20 mW
3.5mm mini jack
2 + 2 W stereo front firing (PMPO 36W)
-55dB re 1V/ubar at 1 KHz
2.2K Ohm max
-5dB at 180°
300Hz~3KHz
300(typ.)
2
250 cd/m (typ.)
6 o'clock
x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
Upper >60 ° (typ.)
Lower >75° (typ.)
Left >80 ° (typ.)
Right >80 ° (typ.)
<=40ms (typ.)
48- 60 KHz, Vsync 60 - 75 Hz (N.I.)
35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
31- 38 KHz, Vsync 60 - 75 Hz (N.I.)