Table of Contents
Advertisement
The OSD Controls
Smart Help
After returning to MAIN CONTROLS...
Smart
... to continue to ADJUST POSITION, press the
Help
is highlighted. Next, follow steps 3 - 6 under ADJUST POSITION.
... to exit completely, press the
ADJUST POSITION
ADJUST POSITION is composed of two steps, ADJUST HORIZONTAL and ADJUST VERTICAL.
ADJUST HORIZONTAL shifts the image on your screen either left or right. Use this feature if your image
does not appear centered in relation to the sides of your screen.
ADJUST VERTICAL shifts the image on your screen either up or down. Use this feature if your image does
not appear centered in relation to the top and bottom of your screen.
1) Press the
button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is
highlighted.
2) Press the
button until ADJUST POSITION is highlighted.
file:///E|/Potomac/english/150x/osd/osd_cont.htm (3 of 18) [8/9/2000 12:48:50 PM]
button.
RETURN TO TOP OF THE PAGE
button until ADJUST POSITION
Advertisement
Table of Contents
Troubleshooting
