Table of Contents
Advertisement
The OSD Controls
INPUT SELECTION
INPUT SELECTION allows you to decide whether the video input into your monitor comes from a digital or
analog source. This is determined by how the video signal is sent from your computer to your monitor.
To find out if the signal is digital or analog, first consult the owner's manual for your computer. Second,
make sure you have the correct connection made to your monitor. If your computer supports both analog
and digital output, you can also use this setting to switch between the two video signals as desired.
1) Press the OK button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted.
2) Press the
button until INPUT SELECTION is highlighted.
3) Press the
button. The INPUT SELECTION window appears.
4) Press the
or
file:///E|/Potomac/english/150x/osd/osd_cont.htm (16 of 18) [8/9/2000 12:48:50 PM]
RETURN TO TOP OF THE PAGE
(not available on all monitors)
button to select either ANALOG or DIGITAL.
Advertisement
Table of Contents
Troubleshooting
