• Ensure there are no overhead power lines within a 20 ft. (7 m) Goalsetter Systems, Inc. reserves the right to make changes at any radius of the goal location. time without notice or obligation.
(H) Top of Frame Height: 142” 142” 142” IMPORTANT Goalsetter Systems, Inc. cannot assume liability for the installation of any Wall Mounted structure. Goalsetter ® Systems recommends consulting a professional architect or contractor to determine a safe wall anchoring system to match the wall construction being used in your application.
Frame Attachment WARNING Two or three people in good physical condition and capable of Mounting Hole " lifting at least 90-100 lbs. (40-45 kg) each are recommended for safe installation and assembly. Step 1: Unpack frame. Step 2: Determine where to place frame on mounting surface.
Rim Attachment NOTE: Use all steps of the following instructions to install a reflex rim. To install a static rim, follow all steps except #2 and #6. TIME OUT TIP: Your warranty card is located behind protective sheeting. You MUST fill out and return this card to activate your warranty.
(b) could result in death, serious injury or property damage, and (c) will void the warranty. • Inspect the Warning Sticker on the pole. If it is ripped, faded or illegible, contact Goalsetter Systems, Inc. to request a replacement Warning Sticker.
**Extreme Series – X672, X660, X560, X554, X454, X448; HEREBY DISCLAIMED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES ***GS Wall Mount Series – GS72 Wall Mount, GS60 Wall Mount, GS54 Wall Mount, GS48 OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNDER NO Wall Mount.
Need help?
Do you have a question about the GS72 and is the answer not in the manual?
Questions and answers