Attaching The Stand - Dell P2418HT User Manual

Attaching the Stand

NOTE: The stand riser and stand base are detached when the monitor is shipped
from the factory.
NOTE: The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the
display panel.
To attach the monitor stand:
• Insert the two tabs on the upper part of the stand to the groove on the back of
the monitor.
• Press the stand down till it snaps into its place.
Setting Up the Monitor | 23