Setting Up the Monitor
Routing the Cables
CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the
display panel.
• Remove the monitor protective cover and place the monitor with its front facing
downward on it.
• To routing the cables:
1. Insert DP cable into DP connector (see
long side of cable hook and push cable to it from top to down.
2. Repeat step 1 to insert VGA/USB cables into corresponding connector and
organize the cables.
3. Finally, insert and organize the power cable and tighten all the cables as shown
above.
Connecting Your
Monitor), press the
Setting Up the Monitor
|
21