Table of Contents
Advertisement
Care and Cleaning
NOTICE
Using the wrong cleaning solution may
damage the valuable surface.
– Under no circumstances should caustic clean-
ing products, rubbing alcohol, thinners, gaso-
line, etc. be used for cleaning. Such cleaning
products could damage the delicate housing
surface.
Troubleshooting
The following tips should help you to solve any problems. Should you require more help, the FAQs on our website will
certainly help you. If you need further assistance, please contact us via the hotline (see page 1). Please pay attention to
the warranty details.
Problem
Playback is noisy.
The sound seems dull.
6
Possible cause
Generally speaking, the speakers are very low
noise. In the high range area, very high-reso-
lution speaker systems can expose the poor
quality of a signal source (e.g. from MP3 files).
Speakers have been connected with incorrect
polarity.
• Ideally, you should remove dust or small amounts of
dirt with a dry, smooth leather cloth.
• Rub off stubborn dirt with a damp cloth. If possible,
only use plain water without any additives. In case of
stubborn marks, a mild soap solution may be used.
Make sure that no liquid penetrates the speakers.
• Then immediately wipe the surfaces dry with a soft
cloth without applying pressure.
Solution
Make sure that the source is emitting a
clear signal.
Check to make sure the cables of all
speakers are correctly connected.
Advertisement
Table of Contents
