Safety guidelines Please read the following General note: Make sure to read this operating manual care- Cables: Lay all the cables flush with the floor and walls. Avoid safety guidelines fully and in its entirety. Before plugging in the units for the first any loops in your cables that could cause people to trip up.
GmbH is in no way bound by the information pro- vided herein. 1. Invoice number Lautsprecher Teufel GmbH assumes no liability As shown on your physical invoice (shipped with for errors contained in this manual. No section the product) or on your order confirmation (PDF of this document may be reproduced or copied format), e.g.
Page 4
Thank you for purchasing speakers from Lautsprecher Teufel. You are now the owner of a powerful and sophis- ticated speaker system. All Teufel products are meticulously manufactured and fitted only with top-quality components. Our LT 3 PE system is designed for audio playback in room sizes of up to 50 m .
Accessories for the LT3 Power Edition resistance. The following accessories are available for the LT3 Power Edition: Teufel Wall Mount Bracket AC 8500 SM Teufel 2 x 2 .5 mm speaker cable This all-purpose wall mount The highly flexible, unilat-...
Page 7
Thanks to its unobtrusive aesthetics and sleek Since the centre speaker is responsible for all design, the Teufel LT 3 PE speaker system will eas- spoken sound including film dialogue, place the ily blend into your living room. In order to achieve...
Page 8
5 .1 speaker placement Technical Specifications and Operating Manual Subwoofer Rear At the recommended crossover frequency of 100 Position the left and right rear speakers either or 120 Hz, the subwoofer can be positioned in the to the side of or behind the main listening room very flexibly without affecting the output...
Front, centre and rear speakers You can connect the LT 3 PE system to any mod- ern Dolby Digital/DTS 5.1/6.1/7.1 AV receiver. If you own a 7.1 AV receiver, simply ignore the Rear Cen- Teufel tre Out(s). connection panel AV receiver If your receiver is 5.1, connect the front, centre...
Settings · Controls Technical Specifications and Operating Manual Setting up the AV receiver If the subwoofer is positioned between the front * Either of the specified crossover To take full advantage of your LT 3 PE Home Thea- speakers, we recommend a phase setting of frequencies can be used.
Sub Out. (optionally with an additional Y adapter). labels of our products signifies that Lautsprecher Teufel ensures Line Output Power the proper disposal of its sold Here, you can connect a second subwoofer for added “OFF”...
If this makes the hum disappear, you will regular “ON” mode, where it is permanently on. If you have any questions, suggestions or criticisms, please contact our support team: Lautsprecher Teufel GmbH Ph.: 00800 200 300 40 No responsibility can be accepted for the correctness of this information.
Need help?
Do you have a question about the LT 3 Power Edition and is the answer not in the manual?
Questions and answers